Embroidery Machine WiFi / Wireless Upgrade

Embroidery WiFi
Embroidery WiFi

The USB to WiFi device can be installed on most all embroidery machines on the market, giving the operator the ability to wirelessly send embroidery designs to all the machines in the embroidery factory.

Upgrade your embroidery machine to wireless!

With the USB to WiFi device, you can wirelessly transfer embroidery designs to your embroidery equipment.  The USB to WiFi will work on any embroidery machine with USB compatibility.  ***Don't have USB on your embroidery equipment?  See below for alternative options!

Break away from cables or USB sticks and move to wireless!

The USB to WIFI device plugs in directly to the USB port on your embroidery equipment.  There are no drivers or software to install on the machine.  Once the stick is in the device, your embroidery machine will read off the stick as if it is a regular USB memory stick.  However, via your existing WiFi network, all designs that the embroidery machine will be reading, will be coming from a remote PC directory.  No need to carry USB sticks or floppy disks from machine to PC!

***Don't have a USB on your embroidery machine?  Upgrade your embroidery equipment by upgrading the Floppy Drive to a USB drive or, by purchasing an external USB reader.

 

  • Floppy To USB converter - Converts/Replaces the Floppy drive with a USB reader.
  • Embroidery Black Box - Replaces external readers such as tape readers or floppy drive readers with a sleek USB reader.  These are generally used for machines without floppy drives.

 

This device works on Tajima, Barudan, Berdina, Brother, ZSK, Janome, Highland, Prodigi, Butterfly, Ricoma, Toyota, Melco, SWF or any other embroidery machine that has a USB port or can be upgraded to read USB sticks (Floppy To USB or Embroidery Black Box).   Each and every embroidery format such as Tajima DST, Melco EXP, etc can wirelessly be transmitted to the embroidery machine USB port. 

Multiple sticks can also be used in a factory setting to share files and directories.

'USB to WiFi' Stick uses your existing WiFi network

'USB to WiFi' Stick has permanent storage

'USB to WiFi' Stick scans your existing PC folder for changes every few seconds then transfers them over

Two way communication and file transfers.  Machines that output files to the stick will have their output copied to the PC folder automatically

Compatible with all versions of windows that have shared folders

'USB to WiFi' Stick automatically refreshes itself.  The operator never has to touch or pull out the stick after installation, ever.  

No drivers nor programs nor any installation files are required on the PC, nothing at all.

The only setup required is to configure the 'USB to WiFi' log onto your WiFi router and shared folder name

'USB to WiFi' Stick compatible with A/G/N WiFi

Visual indicator about strength of received WiFi signal and file transmission speeds, to optimize router placement or quickly identify problems in large warehouses

Live reports and logs about status of every stick

Optional manual file transfer using FTP; automatic transfer may be optionally disabled (v1.1)***

Each stick allows full configuration of its size, timing behaviors, error timeouts, and reports

Both local and remote access and configuration of the stick possible

Configuration of the 'USB to WiFi' stick is through an easy internet browser interface***.  

Automatic error recovery and data protection is built-in, in case of poor WiFi signal or poor electricity.  If the machine corrupts the data, then a replacement image can be made manually or automatically, either blank or from a backup image***

'USB to WiFi' Stick fully boots within seconds

'USB to WiFi'Stick capacity defaults to a single 128mb image but can be larger (due to fast compression) or smaller (at customer choice, or machine requirement)

*In some cases, useable capacity can be up to 512mb due to compression (using only text files, for example)

'USB to WiFi' Stick can subdivide its space via a library system.  For instance, creating 99 "sticks", each the size of a floppy disk.  Or 2 "sticks" of 64mb, or any such combination.  Customer selects one to be visible.

MS-DOS images created by the customer can be directly loaded on or off the stick (if space allows)

Images can be created and erased and switched live.

Advanced configuration available for corporate WiFi router security and certificate needs

Alternative/backup configuration and control of the stick is possible with a simple text based method, through the usb stick directory or the shared-folder PC or through an IP address.   Interface is accessible for any customer third-party programs 

'USB to WiFi' Stick can accept patches and software updates, and can restore to factory default at any time

Multiple 'USB to WiFi' sticks can be assigned to one shared folder

Files can be loaded into many machines simultaneously i.e., drag and drop your files into your shared folder and every machine will share the file

Output files or logs, can (optionally) be separated into different, unique locations so they do not overwrite each other